#609/609BZ/609TBZ/609GTZ Push & Pull Walker Wagon Assembly & Product Information

Follow the steps below to assemble your Push & Pull Walker Wagon:

Questions? Contact Customer Service for fast & friendly help.

Tools Needed: Screwdriver

Compatible Models: #609BZ, #609TBZ, #609GTZ,

TIPS & TRICKS

Step 5: Once fully assembled, the Push & Play Walker Wagon wheels will stay securely in place during use; however, this assembly step requires some force. Please make sure to snap the wheels onto the axles over the groove, before assembling the red wheel covers, as shown below.

Wheels falling off, but hub caps are already assembled: The hub cap covers are removable and reusable. To remove the hub cap cover, use a flathead screwdriver and place it in between the wheel and the hub cap cover. Once secured, lift the screwdriver upwards to release the tabs.
Removing wheel: To remove the wheel, place the product on its side. Place one foot on the opposite wheel you are working on. Pull up on the wheel you want to remove with some force as it needs to get past the groove on the axle.

Does your new product have a missing or damage part? Submit a request for a replacement part under warranty here.

Does your product need a refresh? Email us at customerservice@radioflyer.com or give us a call at 1-800-621-7613 Monday — Friday, 8am to 5pm CST.