#549Z/549BZ/549PPZ, Lean 'N Glide W/Light Up Wheels

Follow the steps below to assemble your Lean 'N Glide W/Light Up Wheels

     Questions? Contact Customer Service for fast & friendly help. 

     Tools Needed: No Tools Required.

     Compatible Models: #549Z, #549BZ, #549PPZ

TIPS & TRICKS

  1. Step 3: Ensure the bushing notches on the handlebar assembly are aligned with the notches on the scooter deck. Push in with enough force that the pin on the handlebar goes through the pre-manufactured hole on the scooter deck (see photo).

TROUBLESHOOTING RESOURCES

  1. Wheels not lighting up: The wheels are motion-activated and will only light up when the product is going at a consistent, fast speed. If your issue persists, please fill out the warranty form below. 
  2. How do I detach the handle: To detach the handle, locate the push button under the scooter deck by the front right wheel and push it in. From there, you can pull up the scooter handle to release (see photo).                                 
  3. The handlebar keeps collapsing: First, ensure the clamp located on the handlebar stem is fully tightened. If the clamp is fully tightened, please ensure the metal pin on the handlebar is secured in one of the three pre-matured holes (see photo).

 

Does your new product have a missing or damaged part? Submit a request for a replacement part under warranty here.

Does your older product need a refresh? Email us at customerservice@radioflyer.com or give us a call at 1-800-621-7613 Monday — Friday, 8 am to 5 pm CST.

 

Download a PDF copy of your instruction manual

Was this article helpful?

1 out of 1 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.