Follow the steps below to assemble your Scoot About Sport:
Questions? Contact Customer Service for fast & friendly help.
Tools Needed: Phillips head screwdriver
Compatible Models: #620Z
TIPS & TRICKS
- Step 5: Ensure the side of the steering column with the bump is facing outward toward the Radio Flyer logo.
-
Step 8: Once fully assembled, the Push & Play Walker Wagon wheels will stay securely in place during use; however, this step requires some force. Please snap the wheels onto the axles over the groove, before assembling the red wheel covers, as shown below.
TROUBLESHOOTING RESOURCES
- Handlebar cover not aligning: First line up the handle cover with the pre-manufactured holes on the front handlebars and listen for a click. Once completed, hold the cover in place and insert the screw. You should then be able to fully tighten the screw into the handlebar cover.
- Wheels falling off, but hub caps are already assembled: The hub cap covers are removable and reusable. To remove the hub cap cover, use a flathead screwdriver and place it in between the wheel and the hub cap cover. Once secured, lift the screwdriver upwards to release the tabs.
- Removing wheel: Place the product on its side to remove the wheel. Place one foot on the opposite wheel you are working on. Pull up on the wheel you want to remove with some force as it needs to get past the groove on the axle.
Does your new product have a missing or damaged part? Submit a request for a replacement part under warranty here.
Does your older product need a refresh? Shop replacement parts here.
Download a PDF copy of your instruction manual
- 620-3_19065.pdf1 MB
Comments
0 comments
Article is closed for comments.