#617Z Bubble Buddy Walker Wagon Assembly & Product Information

Follow the steps below to assemble your Bubble Buddy Walker Wagon:

     Tools Needed: Phillips Head Screwdriver

     Compatible Models: #N/A

ASSEMBLY VIDEO

TIPS & TRICKS

    1. Step 8: Once fully assembled, the Push & Play Walker Wagon wheels will stay securely in place during use; however, this assembly step requires some force. Please make sure to snap the wheels onto the axles over the groove, before assembling the red wheel covers, as shown below. 
    2. Storage: Store away from long-term and/or direct sunlight, which may cause some color fading. The product should also be stored in a cooler area, as long-term heat exposure can warp, deform, and degrade the molded plastic.

    3. Cleaning: Spot clean with hot water and a mild detergent using a soft-bristled brush, rinse with clean water, and dry any metal parts thoroughly.

TROUBLESHOOTING RESOURCES

  1. Wheels falling off, but hub caps are already assembled: The hub cap covers are removable and reusable. To remove the hub cap cover, use a flathead screwdriver and place it in between the wheel and the hub cap cover. Once secured, lift the screwdriver upwards to release the tabs. 
  2. Removing wheel: To remove the wheel, place the product on its side. Place one foot on the opposite wheel you are working on. Pull up on the wheel you want to remove with some force as it needs to get past the groove on the axles.

 

Questions? Contact Customer Service for fast & friendly help. 

 

Does your new product have a missing or damaged part? Submit a request for a replacement part under warranty here.

Download a PDF copy of your instruction manual.

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.