#655 Scan & Sort Shopping Cart With Lights & Sounds Assembly & Product Information

Follow the steps below to assemble your Scan & Sort Shopping Cart With Lights & Sounds:

Tools Needed: Phillips Head Screwdriver.

Compatible Models: #N/A

ASSEMBLY VIDEO

Step 8: Once fully assembled, the Push & Play Walker Wagon wheels will stay securely in place during use; however, this assembly step requires some force. Please make sure to snap the wheels onto the axles over the groove, before assembling the red wheel covers, as shown below.
Storage: Store away from long-term and/or direct sunlight as this may cause some color fading. The product should also be stored in a cooler area, as long-term heat exposure can warp, deform, and degrade the molded plastic.
Cleaning: Spot clean with hot water and a mild detergent using a soft-bristled brush, rinse with clean water, and dry any metal parts thoroughly.

Wheels falling off, but hub caps are already assembled: The hub cap covers are removable and reusable. To remove the hub cap cover, use a flathead screwdriver and place it in between the wheel and the hub cap cover. Once secured, lift the screwdriver upwards to release the tabs.
Removing wheel: To remove the wheel, place the product on its side. Place one foot on the opposite wheel you are working on. Pull up on the wheel you want to remove with some force as it needs to get past the groove on the axle.

Questions? Contact Customer Service for fast & friendly help.

Does your new product have a missing or damage part? Submit a request for a replacement part under warranty here.

Does your older product need a refresh? Shop replacement parts here!