#611z Classic Push & Play Walker Assembly & Product Information

Follow the steps below to assemble your Classic Push & Play Walker:

Questions? Contact Customer Service for fast & friendly help.

Tools Needed: Hammer, Phillips head screwdriver, Allen wrench (provided)

Compatible Models: #611Z

TIPS & TRICKS

Step 6: Ensure you assemble the rear axle on the opposite side of the clicker.
Step 13: Assemble the bucket to the Walker Wagon by first snapping the top into place on the backside of the product. The rib along the top of the bucket should snap into the plastic tabs on the product. Push down on the top of the bucket while simultaneously lifting from the bottom to snap it into place.
Step 15: For difficulty assembling the axle, look behind the product. The openings in the back will you to see where the axle is, and allow you to adjust from there to thread all the way through.

My wheels aren't spinning: If the wheels on your model aren't spinning, please check the orientation of your wheels. The smooth side of the hub with the sticker should be facing outward. The hub cap should be resting up against the smooth hub (see photo).
How do I remove the hub caps: To remove the hub caps, please follow the instructions shown in the video. The video shows a wagon; however, the process will be consistent with other products, as well.

Does your new product have a missing or damaged part? Submit a request for a replacement part under warranty here.

Does your older product need a refresh? Email us at customerservice@radioflyer.com or give us a call at 1-800-621-7613 Monday — Friday, 8 am to 5 pm CST.